Zinc & Electroforming Copper 4 litre Kit

$450.00 Inc Gst

  • You can elect to modify the power supply included in this kit. Select one of the options below if you wish to modify, otherwise, the standard power supply will be included. The options include upgrading or deleting the power supply.

    Power Supply Options;

    • 0 $

Complete 4 Litre DUAL Zinc & Electroforming Copper Kit which includes all items necessary to successfully conduct your own plating. This kit contains plating chemicals which are mixed with water to create 4 litre plating baths in both Zinc & Copper (copper electroplate is the chemical required in the electroforming process). It allows the user to Electroform the items in Copper before plating them in a desirable Zinc finish. It also includes a laboratory type Power Supply. See the full list of Kit contents and Zinc & Electroforming Copper Plating information in the “ELECTROPLATING KITS” category on the home page.

Electroforming is the process of controlling the metal deposit from an anode metal, through the electrolyte solution, onto an electroconductive surface. Basically, a skin of metal is built up, over the applied Conductive Paint, into a rigid structure. This dual kit contains various items including items specific for Zinc plating and Electroforming. (i.e) Conductive Paint for applying to non-conductive surfaces and Copper plating chemicals for applying the base metal to the conductive paint. It also includes the Antiquing Patina solution to assist in producing the ultimate patinaed look and the Clear Shield – Clear Thermoplastic Acrylic Lacquer to lock in the desired look, seal and protect the finished items.

NOTE: Constant movement (not air) inside the plating bath is essential, it enables the chemical to mix and assists with distributing the metal irons around the electroplating bath more efficiently. Jane Kits has a product called an Agitator, which is a small impeller type pump, tested to survive inside the plating chemicals. It is strongly recommended to add an “AGITATOR” to this Kit. They can be found in the “PLATING SUPPLIES” category on our HOME page.

NOTE: The only items you need to supply are a suitable plating container and water to mix your plating chemicals with.

Use only deionised, demineralised, distilled or rain water for mixing with plating chemicals. Do not use tap water!

Search For Products

About Us

The Jane Kits story began when John, a vintage motorbike restorer realised that it would be much more convenient and economical if he was able to plate his own parts in the home workshop. So John decided to source and create his own plating kit and hence Jane Kits was born. John went on to receive numerous awards for his meticulously restored bikes with parts plated using his ingenious new kit.

Read More...

Contact Us

JANE KITS

Cain Rowston (Director / Sales)

Address : 1/351 Pacific Highway Highfields NSW 2289

Phone : 0414 490055

Fax : 02 49 624975

Email : Click here.

ABN : 91 495 360 600

Technical Advice

Email : support@janekits.com.au

Phone : 0414 490055