Shop by category
This slimline 5 Amp power supply provides up to 80W of power, still plenty of grunt for many smaller Electroplating Kits. It is an ideal power supply for our 4 or 10 Litre size Electroplating and Electroforming Kits. It is also an ideal alternative for our Gold Plating Kits. (NOTE; If you are purchasing a 20 Litre Kit or larger, please consider the upgraded 40 Amp Power Supply. This will ensure you have enough current (amps) available).
This unit is able to provide a constant Volts or constant Current (amps) which allows total control of critical ampere delivery which is a must for electroplating. This allows total control of critical ampere delivery which is not a feature of our 15 Amp power supply. Simply select your power range, then adjust the controls to obtain your desired outputs. It has a variable output and current from 0 to 5A. Available are 0-16V @ 0-5A, 0-27VDC @ 0-3A, and 0-36V @ 0-2.2A. Output voltage and current are displayed on large, easily read seven segment LED displays. Output is provided via banana sockets which will accept insulated banana plugs. Includes banana to alligator clamp leads. Incredibly compact in size and light, weighing only 1 kg.
The amount of current (amps) required for electroplating is determined by the total amount of surface area that is in the plating bath. Larger Kit sizes (eg. 20 litres and above) allow more surface area to be plated at one time and therefore more current (amps) are required. This high powered dual controlled switchmode power supply will deliver up to 40 amps which is ideal for our larger Kits. This unit is able to provide a constant Volts or constant Current (amps) which allows total control of critical ampere delivery which is a must for electroplating. It has a variable output voltage from 1 to 15VDC and variable current from 0 to 40A. It features overload, short circuit, over temperature and tracking over voltage protected. Output voltage and current are displayed on large, easily read seven segment LED displays and incorporates an intelligent fan control program that checks the fan at power on and adapts the right speed to ensure a quiet and efficient operation. The maximum current output is 40 amperes continuous. Incredibly light, weighing only 2.9Kgs. Includes mains power cable and positive and negative power cables.
Nickel Kit 10 Ltrs
$440.00 Inc Gst
Complete 10 Litre Nickel Kit which includes all items necessary to successfully conduct your own plating. This kit contains plating chemicals which are mixed with water to create a 10 litre plating bath. It also includes a laboratory type Power Supply. See the full list of Kit contents and Nickel Plating information in the “ELECTROPLATING KITS” category on the home page.
NOTE: Constant movement (not air) inside the plating bath is essential, it enables the chemical to mix and assists with distributing the metal irons around the electroplating bath more efficiently. Jane Kits has a product called an Agitator, which is a small impeller type pump, tested to survive inside the plating chemicals. It is strongly recommended to add an “AGITATOR” to this Kit. They can be found in the “PLATING SUPPLIES” category on our HOME page.
NOTE: The only items you need to supply are a suitable plating container and water to mix your plating chemicals with.
Use only deionised, demineralised, distilled or rain water for mixing with plating chemicals. Do not use tap water!
Search For Products
The Jane Kits story began when John, a vintage motorbike restorer realised that it would be much more convenient and economical if he was able to plate his own parts in the home workshop. So John decided to source and create his own plating kit and hence Jane Kits was born. John went on to receive numerous awards for his meticulously restored bikes with parts plated using his ingenious new kit.
- Chromates / Passivating
- DUAL Electroplating Kits
- Electroless Nickel
- Electroplating Kits
- Gif Vouchers
- Parkerising / Steel Blackening
- Plating Chemicals
- Plating Supplies
- Power Supplies
- TRIPLE Electroplating Kits