Shop by category
This slimline 5 Amp power supply provides up to 80W of power, still plenty of grunt for many smaller Electroplating Kits. It is an ideal power supply for our 4, 10 & 20 Litre size Electroplating and Electroforming Kits. It is also an ideal for our Gold Plating Kits. (NOTE; If you are purchasing a 30 Litre Kit or larger, please consider the upgraded 40 Amp Power Supply. This will ensure you have enough current (amps) available).
This unit is able to provide a constant Volts or constant Current (amps) which allows total control of critical ampere delivery which is a must for electroplating and or electroforming. Simply select your power range, then adjust the controls to obtain your desired outputs. It has a variable output and current from 0 to 5A. Available are 0-16V @ 0-5A, 0-27VDC @ 0-3A, and 0-36V @ 0-2.2A. Output voltage and current are displayed on large, easily read seven segment LED displays. Output is provided via banana sockets which will accept insulated banana plugs. Includes banana to alligator clamp leads. Incredibly compact in size and light, weighing only 1 kg.
The amount of current (amps) required for electroplating is determined by the total amount of surface area that is in the plating bath. Larger Kit sizes (eg. 30 litres and above) allow more surface area to be plated at one time and therefore more current (amps) are required. This high powered dual controlled switchmode power supply will deliver up to 40 amps which is ideal for our larger Kits. This unit is able to provide a constant Volts or constant Current (amps) which allows total control of critical ampere delivery which is a must for electroplating and or electroforming. It has a variable output voltage from 0 to 15VDC and variable current from 0 to 40A. It features overload, short circuit, over temperature and tracking over voltage protected. Output voltage and current are displayed on large, easily read seven segment LED displays and incorporates an intelligent fan control program that checks the fan at power on and adapts the right speed to ensure a quiet and efficient operation. The maximum current output is 40 amperes continuous. Incredibly light, weighing only 2.9Kgs. Includes mains power cable and positive and negative power cables.
Metex M 600grams
$11.00 Inc Gst
METEX M 600gm is a dry acid salt. Your parts have to be completely clean prior to this activation and is a process done immediately prior to commencing Jane Kits Ultra Strike or Parkerising procedures. After immersion in the Metex M solution, a clean water rinse is required before placing into the bath. Metex M acid salts dissolved in water are recommended as an activating dip prior to using our Ultra Strike and Parkerising procedures. Mixing ratio is obtained from a reference to a table supply in Plating Manual.
Search For Products
About Us
The Jane Kits story began when John, a vintage motorbike restorer realised that it would be much more convenient and economical if he was able to plate his own parts in the home workshop. So John decided to source and create his own plating kit and hence Jane Kits was born. John went on to receive numerous awards for his meticulously restored bikes with parts plated using his ingenious new kit.
Customer Service
Contact Us
JANE KITS
Cain Rowston (Director / Sales)
Address : 1/351 Pacific Highway Highfields NSW 2289
Phone : 0414 490055
Fax : 02 49 624975
Email : Click here.
ABN : 91 495 360 600
Technical Advice
Email : support@janekits.com.au
Phone : 0414 490055