Shop by category
This slimline 5 Amp power supply provides up to 80W of power, still plenty of grunt for many smaller Electroplating Kits. It is an ideal power supply for our 4, 10 & 20 Litre size Electroplating and Electroforming Kits. It is also an ideal for our Gold Plating Kits. (NOTE; If you are purchasing a 30 Litre Kit or larger, please consider the upgraded 40 Amp Power Supply. This will ensure you have enough current (amps) available).
This unit is able to provide a constant Volts or constant Current (amps) which allows total control of critical ampere delivery which is a must for electroplating and or electroforming. Simply select your power range, then adjust the controls to obtain your desired outputs. It has a variable output and current from 0 to 5A. Available are 0-16V @ 0-5A, 0-27VDC @ 0-3A, and 0-36V @ 0-2.2A. Output voltage and current are displayed on large, easily read seven segment LED displays. Output is provided via banana sockets which will accept insulated banana plugs. Includes banana to alligator clamp leads. Incredibly compact in size and light, weighing only 1 kg.
The amount of current (amps) required for electroplating is determined by the total amount of surface area that is in the plating bath. Larger Kit sizes (eg. 30 litres and above) allow more surface area to be plated at one time and therefore more current (amps) are required. This high powered dual controlled switchmode power supply will deliver up to 40 amps which is ideal for our larger Kits. This unit is able to provide a constant Volts or constant Current (amps) which allows total control of critical ampere delivery which is a must for electroplating and or electroforming. It has a variable output voltage from 0 to 15VDC and variable current from 0 to 40A. It features overload, short circuit, over temperature and tracking over voltage protected. Output voltage and current are displayed on large, easily read seven segment LED displays and incorporates an intelligent fan control program that checks the fan at power on and adapts the right speed to ensure a quiet and efficient operation. The maximum current output is 40 amperes continuous. Incredibly light, weighing only 2.9Kgs. Includes mains power cable and positive and negative power cables.
JPK Acid Strip 600gm
$8.00 Inc Gst
600gm bag JPK Acid Strip is a water-soluble dry acid salt used for aggressive stages of metal preparation prior to plating. The salt is mixed with water at a ratio of 200gm per litre (i.e. 600gm bag of JPK Acid Strip will make a 3 litres mix). The acid is a sulphuric acid base and is predominantly used in the early aggressive stage of preparation to assist in bring your parts back to bare steel. This type of acid is excellent for most metal preparation requirements. It will dissolve zinc coatings, steel blackening coatings, some paint finishes from metals. It is an excellent addition when used in conjunction with Jane Clean, Jane Kits other aggressive cleaner.
As JPK Acid Strip is used at the early stages of preparation and therefore your parts will then continue through other forms of cleaning and preparation prior to going into the plating bath, the original mix can be used multiple times.
NOTE always wear chemical resistant gloves when working with JPK Acid Strip. Any items left in a JPK Acid Strip mixture should be monitored regularly. JPK Acid Strip is ACID base and items left in this solution for extended periods of time will eventually damage the parent metal.
Search For Products
The Jane Kits story began when John, a vintage motorbike restorer realised that it would be much more convenient and economical if he was able to plate his own parts in the home workshop. So John decided to source and create his own plating kit and hence Jane Kits was born. John went on to receive numerous awards for his meticulously restored bikes with parts plated using his ingenious new kit.