Click Here - for Detailed 5amp Power Supply Information

This slimline 5 Amp power supply provides up to 80W of power, still plenty of grunt for many smaller Electroplating Kits. It is an ideal power supply for our 4, 10 & 20 Litre size Electroplating and Electroforming Kits. It is also an ideal for our Gold Plating Kits. (NOTE; If you are purchasing a 30 Litre Kit or larger, please consider the upgraded 40 Amp Power Supply. This will ensure you have enough current (amps) available).

This unit is able to provide a constant Volts or constant Current (amps) which allows total control of critical ampere delivery which is a must for electroplating and or electroforming. Simply select your power range, then adjust the controls to obtain your desired outputs. It has a variable output and current from 0 to 5A. Available are 0-16V @ 0-5A, 0-27VDC @ 0-3A, and 0-36V @ 0-2.2A. Output voltage and current are displayed on large, easily read seven segment LED displays. Output is provided via banana sockets which will accept insulated banana plugs. Includes banana to alligator clamp leads. Incredibly compact in size and light, weighing only 1 kg.

Click Here - for Detailed 40 amp Upgraded Power Supply Information

The amount of current (amps) required for electroplating is determined by the total amount of surface area that is in the plating bath. Larger Kit sizes (eg. 30 litres and above) allow more surface area to be plated at one time and therefore more current (amps) are required. This high powered dual controlled switchmode power supply will deliver up to 40 amps which is ideal for our larger Kits. This unit is able to provide a constant Volts or constant Current (amps) which allows total control of critical ampere delivery which is a must for electroplating and or electroforming. It has a variable output voltage from 0 to 15VDC and variable current from 0 to 40A. It features overload, short circuit, over temperature and tracking over voltage protected. Output voltage and current are displayed on large, easily read seven segment LED displays and incorporates an intelligent fan control program that checks the fan at power on and adapts the right speed to ensure a quiet and efficient operation. The maximum current output is 40 amperes continuous. Incredibly light, weighing only 2.9Kgs. Includes mains power cable and positive and negative power cables.

Electroforming Copper Kit 20 Ltrs

Name: Electroforming Copper Kit 20 Ltrs
SKU: 4434
Price: 605.00 AUD
Availability: InStock

$605.00 Inc Gst

Complete 20 Litre Electroforming Copper Kit which includes all items necessary to successfully conduct your own Electroforming. Electroforming is the process of controlling the metal deposit from an anode metal, through the electrolyte solution, onto an electroconductive surface. Basically, a skin of metal is built up, over the applied Conductive Paint, into a rigid structure. This kit contains various items including; Conductive Paint for applying to non-conductive surfaces and Copper plating chemicals for applying the base metal to the conductive paint. It also includes the Antiquing Patina solution to assist in producing the ultimate patinaed look and the Clear Shield – Clear Thermoplastic Acrylic Lacquer to lock in the desired look, seal and protect the finished items. The Kit includes a laboratory type Power Supply, Plating Manual and various consumables. See a full list of Kit contents and Electroforming Copper information in the “ELECTROPLATING KITS” category on the home page.

NOTE: Constant movement (not air) inside the plating bath is essential, it enables the chemical to mix and assists with distributing the metal irons around the electroplating bath more efficiently. Jane Kits has a product called an Agitator, which is a small impeller type pump, tested to survive inside the plating chemicals. It is strongly recommended to add an “AGITATOR” to this Kit. They can be found in the “PLATING SUPPLIES” category on our HOME page.

NOTE: The only items you need to supply are a suitable plating container and water to mix your plating chemicals with.

Use only deionised, demineralised, distilled or rain water for mixing with plating chemicals. Do not use tap water!

Search For Products

About Us

The Jane Kits story began when John, a vintage motorbike restorer realised that it would be much more convenient and economical if he was able to plate his own parts in the home workshop. So John decided to source and create his own plating kit and hence Jane Kits was born. John went on to receive numerous awards for his meticulously restored bikes with parts plated using his ingenious new kit.

Customer Service

Contact Us

JANE KITS

Cain Rowston (Director / Sales)

Address : 1/351 Pacific Highway Highfields NSW 2289

Phone : 0414 490055

Fax : 02 49 624975

Email : Click here.

ABN : 91 495 360 600

Technical Advice

Email : support@janekits.com.au