Electroforming Copper Kit 4 Ltrs
$328.00 Inc Gst
Description
Complete 4 Litre Electroforming Copper Kit which includes all items necessary to successfully conduct your own Electroforming. Electroforming is the process of controlling the metal deposit from an anode metal, through the electrolyte solution, onto an electroconductive surface. Basically, a skin of metal is built up, over the applied Conductive Paint, into a rigid structure. This kit contains various items including; Conductive Paint for applying to non-conductive surfaces and Copper plating chemicals for applying the base metal to the conductive paint. It also includes the Antiquing Patina solution to assist in producing the ultimate patinaed look and the Clear Shield – Clear Thermoplastic Acrylic Lacquer to lock in the desired look, seal and protect the finished items. The Kit includes a laboratory type Power Supply, Plating Manual and various consumables. See a full list of Kit contents and Electroforming Copper information in the “ELECTROPLATING KITS” category on the home page.
NOTE: Constant movement (not air) inside the plating bath is essential, it enables the chemical to mix and assists with distributing the metal irons around the electroplating bath more efficiently. Jane Kits has a product called an Agitator, which is a small impeller type pump, tested to survive inside the plating chemicals. It is strongly recommended to add an “AGITATOR” to this Kit. They can be found in the “PLATING SUPPLIES” category on our HOME page.
NOTE: The only items you need to supply are a suitable plating container and water to mix your plating chemicals with.
Use only deionised, demineralised, distilled or rain water for mixing with plating chemicals. Do not use tap water!
Additional information
| Weight | 3.8 kg |
|---|
Related products
Search For Products
About Us
The Jane Kits story began when John, a vintage motorbike restorer realised that it would be much more convenient and economical if he was able to plate his own parts in the home workshop. So John decided to source and create his own plating kit and hence Jane Kits was born. John went on to receive numerous awards for his meticulously restored bikes with parts plated using his ingenious new kit.
Product Categories
Customer Service
Contact Us
JANE KITS
Cain Rowston (Director / Sales)
Address : 1/351 Pacific Highway Highfields NSW 2289
Phone : 0414 490055
Fax : 02 49 624975
Email : Click here.
ABN : 91 495 360 600
Technical Advice
John Norgard
Phone : 0421 458 482